Management And Supervisory Control System Of Automated Warehouse Based On Database And Configuration Software

Automated high-rise warehouse uses the high-rise rack to store the goods, uses the narrow-aisle stacker crane and other equipments such as loading crane or conveyer to carry the goods into or out of the warehouse. The warehouse is controlled by the computer so that it doesn't need labor to do it. Automatic storage and retrieval system is an important part of the modern logistic system. With the development of the modern industry, the automated warehouse must receive the real-time task and perform the task, at the same time, it should feed back the information whether the task has finished. So the management system, the monitor system and the control system must work coordinately and efficiently.The main contents of the thesis: the management system of the automated warehouse based on the database, the supervisory control system of the automated warehouse based on the configuration software, the network structure and the communication mode of the system. In the management system, the thesis discusses the general architecture and the modules of the system, then it sets up the database system, researches the strategy of placing the goods and the strategy of sequencing the task. In the management system, the programming realizes those optimized strategies and uses the neural network to optimize the path of the sorting work. The thesis also discusses the application of the bar code and so on. The supervisory control system is programmed by the configuration software. The configuration software can communicate with the management computer and the actuating equipments easily. The thesis introduces how to set up the monitoring picture and how to communicate with the actuating equipments. The thesis also discusses the composition of the control system and the network of the system. Then it introduces the method of real-time control and the way of warning. Through the database and the configuration software's drivers of the I/O devices, it is possible to realize theintegration of the management and control. Based on that, the efficiency can be raised, the real-time data can be stored and the demand of the modern logistics system can be met.