Remote Intelligent Meter Reading Based On Embedded System Design

With the development of intelligent community,Intelligent Remote Meter Reading System is paid more attention to by gas company,land agent and customers,and Intelligent Remote Meter Reading System with veracity and reliability has become an actual reguirement.At the same time,with the delelopment of computer technology,communication technology and the in-depth application of the Interne,more and more embedded systems are running around us,Real-time digital processing,functions interlinked with network,intellectual software and better-extended ability have nearly become the mutual need of modern real-time measuring and monitoring systems.Therefore,this article will be a combination of both organic design a set of intelligent remote meter-reading collection,control system.The system uses the production of Philips ARM7-based LPC2292 embedded processor core.Hardware system as a result of the introduction of the development of embedded processors,so from a hardware point of view,it is essentially a typical embedded system design,software development in the use of the current popularμC/ OSⅡOperation systems,procedures and portability of the generic has been significantly improved.The system through the network management center and the communications between computers.Management Center to receive the various control commands to the signal.The use of digital data transmission,high resistance to electromagnetic interference,and ensure 100%accuracy of data.As a result of transplantation of the real-time embedded operating system,the system can handle real-time multi-task to improve the management capacity of the system to ensure the real-time transmission of information,which is a traditional single-task system can not match.