| Along with the rapid development of national economy,facing the increasinglycompetitive market environment,the traditional management mode of production hasbeen gradually withdrew from the stage of history. It can’t keep up with the pace of TheTimes,and the continuous improvement of computer technology to realize the multipleproduction unit production process moninoring and management.This topic for roller unit based on automatic production line,first roller in thecurrent production situation and the background was introduced,and the productionprocess and production line, Then according to the characteristics of the production process,Research and analysis the control process of roller production.combining with theprogrammable controller,abvanced automatic technoloy,powerful function ofconfiguration software technolgy and technology on electric power,etc.We developedand designed by using the siemens s7-300plc as the control core and WINCCconfiguration software for pc monitoring system of roller production management.In this paper,according to the characteristics of roller automatic production,usingthe simens plc as the control core of the management system,on the whole hardwarestructure of the control system design,and use configuration software WINCCcombination of s7-300and WINCC communications methods,to monitor the wholeproduction process design,mainly including production,configuration and alarmmonitoring of running status of equipment work or parameter display and fault alarmsystem,etc.Through the use of siemens s7-300plc and wincc configuration softwaretechnology,for real-time monitoring of the working process of the multiple cells and theeffective management of the production plan is completed,it has greatly raised labourproductivity and reduced production cost,but also improve the roller production qualittyand reduce the rejection rate,makes the roller in the increasingly competitiveenviroment for the vitality and development. |
PDF Full Text Request