Scalable Methods for Reliability Analysis in Digital Circuits using Physics-Based Device-Level Models

Gate oxide time-dependent dielectric breakdown (TDDB) is an effect that can result in circuit failure as devices carry unwanted and large amounts of current through the gate due to oxide breakdown. Realistically, this results in catastrophic failures in logic circuits, and a useful metric for circuit reliability under TDDB is the distribution of the failure probability. The first part of this thesis develops an analytic model to compute this failure probability, and differs from previous area-scaling based approaches that assumed that any device failure results in circuit failure. On the contrary, it is demonstrated that the location and circuit environment of a TDDB failure is critical in determining whether a circuit fails or not. Indeed, it is shown that a large number of device failures do not result in circuit failure due to the inherent resilience of logic circuits. The analysis begins by addressing the nominal case and extends this to analyze the effects of gate oxide TDDB in the more general case where process variations are taken into account. The result shows derivations that demonstrate that the circuit failure probability is a Weibull function of time in the nominal case, while has a lognormal distribution and at a specified time instant under process variations. This is then incorporated into a method that performs gate sizing to increase the robustness of a circuit to TDDB effect.;Unlike gate oxide TDDB, which results in catastrophic failures, both BTI and HC effects result in temporal increases in the transistor threshold voltages, causing a circuit to degrade over time, and eventually resulting in parametric failures as the circuit violates its timing specifications. Traditional analyses of the HC effects are based on the so-called lucky electron model (LEM), and all known circuit-level analysis tools build upon this model. The LEM predicts that as device geometries and supply voltages reduce to the level of today's technology nodes, the HC effects should disappear; however, this has clearly not been borne out by empirical observations on small-geometry devices. An alternative energy-based formulation to explain the HC effects has emerged from the device community: this thesis uses this formulation to develop a scalable methodology for hot carrier analysis at the circuit level. The approach is built upon an efficient one-time library characterization to determine the age gain associated with any transition at the input of a gate in the cell library. This information is then utilized for circuit-level analysis using a probabilistic method that captures the impact of HC effects over time, while incorporating the effect of process variations. This is combined with existing models for BTI, and simulation results show the combined impact of both BTI and HC effects on circuit delay degradation over time.;In the last year or two, the accepted models for BTI have also gone through a remarkable shift, and this is addressed in the last part of the thesis. The traditional approach to analyzing BTI, also used in earlier parts of this thesis, was based on the reaction-diffusion (R-D) model, but lately, the charge trapping (CT) model has gained a great deal of traction since it is capable of explaining some effects that R-D cannot; at the same time, there are some effects, notably the level of recovery, that are better explained by the R-D model. Device-level research has proposed that a combination of the two models can successfully explain BTI; however, most work on BTI has been carried out under the R-D model. One of the chief properties of the CT model is the high level of susceptibility of CT-based mechanisms to process variations: for example, it was shown that CT models can result in alarming variations of several orders of magnitude in device lifetime for small-geometry transistors. This work therefore develops a novel approach for BTI analysis that incorporates effect of the combined R-D and CT model, including variability effects, and determines whether the alarming level of variations at the device level are manifested in large logic circuits or not. The analysis techniques are embedded into a novel framework that uses library characterization and temporal statistical static timing analysis (T-SSTA) to capture process variations and variability correlations due to spatial or path correlations. (Abstract shortened by UMI.).