| As a part of the revitalization of the supersonic wind tunnel maintained by the Aerospace Engineering Department of Mississippi State University, a new data acquisition and control system became incumbent. Previous data acquisition and control systems used in the operation of the supersonic wind tunnel made use of now outdated hardware and functioned with two central processing units; one processor was used for recording system response, while the other monitored and controlled the tunnel. A new system is required to provide adequate rapid real-time control, along with rapid acquisition of raw tunnel feedback or response data and tunnel pressure data all implemented on one computer processor. This paper details the development of the supersonic wind tunnel data acquisition and control system employed in the revitalization project. |
