Automatic Monitoring And Control System Research Desalting Water Treatment Process

With the rapid development of Industrial Science and technology,the automation degree of brine treatment technology is more and more high,in order to realize the operation stability,quality reliability,production can automatic monitoring,improve the enterprise's modernization construction and enhance its comprehensive strength,it is necessary to build the automatic control system of the automatic control system,This topic comes from a project,according to the local water quality and the actual production situation,to develop a set of system stability,high production efficiency,low cost,high accuracy of ion exchange and water treatment automatic monitoring system.The main work and results are as follows:1.Combined with the development of the enterprise itself and the local water quality requirements,determine the use of ion exchange and water treatment process.Based on the analysis of the company's actual survey and customer requirements,a SIEMENS PLC controller and WinCC configuration software as the main platform,with.all kinds of instruments as auxiliary equipment,constitute the automatic monitoring system for the automatic control system for the automatic control and remote monitoring.2.According to the hardware design and guiding ideology,detailed design of the PLC input and output circuit;for the actual situation and the power supply environment,the low voltage power distribution,grounding protection,UPS Power Design for a detailed explanation.3.The software design of the monitoring system is analyzed in detail.The PLC program design of automatic monitoring system is described,the design requirements of the programming software,program design and the program of the control system are described in detail.Then the design of WinCC configuration monitoring system is described.