Design And Implementation Of Radar If Signal Switch Array Control Software

Microwave industry to modern digital microwave communication as the representative of the rapid development in the world, the broad market, the fast development of the technology is very impressive. In today’s world, there are a variety of digital microwave electronic products put on the market, behind the upgrading of products, bring forth the new through the old, we can feel the product research and development, production, use and repair and so on can avoid many complex, cumbersome requirements testing. Microwave testing has occupied a very important position in modern microwave research and modern microwave engineering, and became one of the important conditions for the rapid development of microwave technology.RF and microwave switch is widely used in automatic test system in a microwave, as a test equipment and signal routing between products. The matrix switch, is the RF signal and switch signal collection system and to the system, so that we can get when the test signal from the different distribution of test equipment to one or more of the products to be tested. So we can only use a set of test equipment to perform different tests, and do not need to replace the test equipment and the connector frequently. In order to achieve the automation testing process, reduce the test time, speed up the production cycle of the product and can reduce the labor and equipment costs.The main work of this thesis and results are produced a matrix switch can achieve 10 power divider and 12 way switch switching. Do the local control and remote control switch, the tester can carry out a series of tests on the vehicle equipment in the far distance.