Design Of Embedded Linux Configuration Software Monitoring System

With most of the domestic oil field development are descending into post-production,liquids production increased, rising water cut of crude oil, and salt and sediment classmechanical impurities in the oil and gas wells, also often contain a mixture of thesesubstances will increase the liquid volume flow stream, the effective utilization of equipmentand piping is reduced, so the oil in the water, salt, and impurities in the purification of crudeoil into the gathering system before to be done, so as to make it into qualified product ofcrude oil. In this paper, the characteristics of the production process, combined withtechnological requirements of production, crude oil dehydration monitoring system to studythe use of DCS system for joint oil gathering station provides automated monitoring andhistorical data records.DCS is suitable for the production of objects intensive, continuous but relativelycomplex applications, such as in oil and gas production process, such as Union Station orcentralized processing station, a stable level of crude oil and gas processing. DCS increasedthe logical sequence of the current control function, so he expanded the scope of application,his main features are: to achieve hierarchical control, high reliability, easy convenientnetworking, programming, maintenance, development cycle is short, easy to implement"centralized management, decentralized control " and other functions. Therefore, the jointstation uses DCS system is the best choice.Firstly, the dehydration of crude oil monitoring system joint stand for a simpleintroduction, then the research and design of monitoring system, followed by hardwareselection is good, conducted a monitoring system design and programming, real-time dataaccording to their characteristics. Finally, on-site commissioning and operation.The system automates the transformation of a joint station can automatically collect andrecord the production process and detect various data, and to optimize the processing, thereare energy saving, environmental protection, energy saving, high efficiency operation.