Research And Design Of Remote Monitoring System For Industrial Equipment Based On WinCE

Remote monitoring the industrial equipments can not only collect the real-time data of the equipments to for monitoring on-site data or remote diagnosis,but also enables technicians get the state and parameters of the devices without visiting the site,which reduce the number of staff realizing unattended or few people monitored system. The current monitoring tracking system generally adopted moving target detection and tracking algorithm, which can only be applied in simple cases. When the environment is complex, these algorithms are difficult to detection the non-rigid objects whose shapes changed dramatically. Now the use of GPS location technology combined with GPRS/CDMA mobile communication technology on vehicle monitoring system is successful in many cases,but the use of such technology for remote unattended monitori and anti-theft system of industrial equipment have very little domestic research.In this paper, author design an industrial equipment remote monitoring solution which combines embedded technology,GPS location technology and GPRS wireless communication technology.. The system platform is ICOP VSX-6154 which uses an embedded PC/104 single board and built-in WinCE operating system. It link GSU-36AF GPS module, MC55 GPRS modules and USB camera through its rich peripheral interface. Once the monitoring device was found moved through motion detection the camera captured image sequence, the system trigger GPS module immediately, then GPS module will send position information through the serial port to the main control module of the system.The position information which processed by the control module transmit to the monitoring center through the GPRS network,GPRS module send alarm signal to inform surveillance personnel so as to take timely and effective action. This can reduce monitors personnel's burden to a great extent and realizes unattended system. When the monitored equipment was detected moved,we uses the GPS information to carry on the real-time track This GPS tracking technology replaced target tracking algorithm reduces the complexity of motion detection and makes the tracking effect more remarkably. Finally System has been tested to achieve good results which meet the requirements of remote monitoring.