Research Of Moving Target Mine Safety Monitoring System

Coal production is a high-risk industries.It is also indispensable for China's economic development resources. The degree of attention about National production of coal mine safety has reached to an unprecedented high. But mine matters are still ongoing, moreover emergency rescue and disaster relief after the disaster don't do its best which exposed the drawbacks of the current monitoring system:It is difficult to manage ones into the wells for the Monitoring and Control System.Outground persons could not grasp the dynamics of the distribution of underground personnel and operations.This paper taking TI Corporation's CC2430 chip and CC2431 chip as cores, designes moving target coal mine real-time location monitoring system based on ZigBee technology and builts the smallest ZigBee wireless location network hardware platforms. By analysing the ZigBee Technology standard and communication protocol, designs the gateway node, reference node and positioning the bottom node procedures.The ultimate goal of the mine action activities in the PC software interface on the Z-Location tracking shows that the achievement of the objectives of the mine action tracking and monitoring .The activities of the moving target will eventually be tracking position and monitoring.The coal mine system can in real-time monitor and position the personnel and equipment and provide for the working person the current position and tracking targets of the dynamic information of the personnel into the well land device status to improve scheduling efficiency . Once the accident happened, you can quickly determine the location and trapped personnel and equipment's situation.It also provides detailed information firsthand to rescue work and improve the succor efficiency. The system has certain advancement and practicability and important practical significance to improve the safety of coal production management.