Study Of The Lcd Moudule Green Supply Chain

Sustainable development is a hot topic in recent years. Green Product, Energy Conservation & waste reduction is the carbon footprint of the electronics industry volunteered, or mutually agreed participation in environmental protection activities in the spindle. From the start of global warming, of its causes and the corresponding improvement in the direction of liquid crystal display manufacturing industry, and then talk about the green movement, focusing on liquid crystal display industry, the concept of green supply chain and the implementation of the instance. As the brand manufacturers such as 3M, GE, Ford, and a lot of discussion in this regard, this special selection of traditional pieces of plastic injection molding industry, as the study process to explore the new energy-saving technology and saving energy and reducing waste around new ideas for small and medium private enterprises in the wider reference.First, for the sustainable development of the current situation as an overview, the introduction of advanced LCD industry examples, including the objectives and strategies of the enterprise itself, the green supply chain.Analysis of the traditional injection molding industry, business processes and the status of CO2 emissions, introducing energy saving companies in the process of implementing several important technology breakthroughs to the periphery of the new waste reduction ideas. Main achievements are:(1) Injection molding cycle through a comprehensive analysis of factors and try to lower the cooling water temperature, increasing the diameter of the cooling water supply pipe and the success of specific programs, significantly reducing cycle time, and does not affect product quality. Which can reduce the effects of energy consumption per unit of product?(2) Proposed ultrasonic welding and quality improvement programs to address the traditional methods, such as adhesion, such as time-consuming two-color injection energy deficiencies.(3) A needle-point improvement into the gate, greatly reducing the secondary products, manufacturing processes, thereby reducing the unit energy consumption of port production and cost.(4) Attempts to larger TV in the implementation of small and medium size models mature dispensing technology. Although so far because of the friction coefficient is mainly the mass production is not successful, but accumulated from material selection to process parameters to the cooling process and a series of experiences.(5) Introduced users and customers to determine the concept of quality standards, the implementation of Right Spec. & Right Quality, for the production of a truly low-carbon basis.Finally, the paper also explores the environmental effects of surface areas of design, trying to show that the environment than the current efficiency generally more in-depth discussion of the concept of sustainable development more thoroughly.