The Design Of The Wireless Remote Measurement And Control System Based On Embedded ARM_ Linux For Unattended Alternator

Small gasoline generators has small volume, light weight, mobile is convenient wait for a characteristic, is often cited as the power, unattended equipment, petroleum exploration in shooting range test and field operations, communications and the disaster relief test etc special unattended case widely used. To ensure that it can be properly, it must pass telemetry remote control methods, control of its operation and master status. For the unattended the system's power system, this paper takes control problem for example small generators, design a kind of based on embedded ARM_linux wireless remote measurement and control system.By the research of the embedded technology, remote measurement and control technology, based on the wireless communication technology, according to the remote measurement and control system was designed based on functional requirement, ARM_linux remote measurement and control platform, including the application layer communication protocol, embedded system software, etc. This system based on C/S architecture; ZigBee technology platform; Site ARM_linux embedded system adopts control terminals, software part adopts frame, design multithreading technology based on Linux A/D drivers and serial communication program; Based on vc + + 6.0 designed a PC management platform software. The system platform interactive strong, wireless communication system, low power consumption, low cost, convenient operation system visualization strong.Test verified each function. of the system.