Research And Development Of Automatic Packaging Machine Control System

With the continuous development of packaging industry,the present forms of packaging on the market is very diverse,packaging industry in our country at present stage the work flow is as follows: first of all,artificial ways for weighing,the supplies by manually load mode will be material in the plastic bag,and then through the automatic transmission channels will be completed bagging materials bag in vacuum extraction machine,air extraction,extraction,then bag sealing materials,and thus can achieve vacuum packing.Is not hard to find in this mode,the article can very clearly see the mechanization degree is very low,in the packaging of most links are rely on manual operation to complete,which leads to the packing is very slow,it also takes a lot of manpower,plus packaging artificial cost is very high.Pack the goods in addition to this,because it is artificial,in the process of packaging,people will be directly in contact with the material,from the point of view of environmental health,may cause pollution to the material,especially to the hygienic requirements higher material,medical supplies and food,for example,apparently does not conform to the hygiene standards.This is not hard to find,the traditional manual operation is not able to meet the market demand of present packaging industry.How can realize one-time automatic packing packing work mode,is the packaging industry faces an important problem.So,an automatic control system of packaging machinery research and development work is very urgent,this article is based on the industry background,system design and development work.In this paper,the design of automatic packaging machine control system,the use of the main direction of the packing is plastic film or aluminum foil membrane for material is not sticky snacks as the research object,such as seeds,rice,Chinese wolfberry,such items.Compared to the safety and health requirements higher pharmaceuticals or mechanical components,such as system,can adopt double packing method,namely the inner bag and outer bag packing at the same time,on the basis of general air inside the bag away,can guarantee the security,on the basis of ensure material will not be affected with damp be affected with damp,mildew,bacteria and oxidation,etc.,makes the material can be completed with good quality and fresh in the largest extent.