CNC Equipment Centralized Control Management System Research And Design

CNC equipment manufacturing industry as the bottom end of the processing tools,equipment advanced degree directly reflects the country ’s manufacturing level, modernmanufacturing industry of numerical control equipment requirements are also gettinghigher and higher, which is mainly reflected in the NC equipment communication it putsforward high requirements. Modern manufacturing industry is a global manufacturing. Inorder to realize the design and manufacture of seamless connection. This requires nowprocessing equipment must have globalization communication ability. But for now wehave access to a processing enterprises, the production equipment is old, cannot satisfythe requirement of modern manufacturing. Then the old equipment modernizationprocess, in order to adapt to the modern manufacturing requirements is very necessary.This topic mainly based on Liuzhou city manufacturing industry current situation, putforward to the old processing equipment for the network to transform. To meet the needsof modern manufacturing of communication skills. Based on the NC system networktrend as the breakthrough point, introduce the NC equipment management system,database management and network module into the CNC system management structure,to realize equipment processing and the globalization of production managementmodular.NC machining process is a complex process, for the production process of involvedparameters as well as needed for the production of processing code data needstandardized management. In view of this situation, the introduction of databasetechnology, the data management, solve this problem through the text data storage.Through the already obtained result, in order to achieve the above the effective datamanagement. The processing efficiency is greatly improved.In the present system is another key is CNC equipment communication functionrealization, for the basic processing unit communication function is realized mainlybased on its communication interface, in the actual investigation process, the serial portis most CNC machining equipment and the outside of the major means ofcommunication. So instead of system is mainly based on serial port communicationprotocol (RS232protocol); to meet the current situation at the same time, but also forsoftware development in TCP/IP protocol communication means. Great to meet avariety of interface of CNC equipment network access request. To better realize the NCequipment centralized control...