Pcs7 Process Control System Design And Research Of Engineering Training

This paper is based on the training of automation technology in the colleges. According to the demand of the society, we designed a process control engineering training system which is based on PCS 7. To solve the typical problems of process controlling industry, some different control methods and algorithms were discussed and adopted in the dissertation.To begin with, the process control technologies of PCS 7 were studied and concluded. Furthermore, to solve the problem of lack of equipment in colleges, the main structure of simulative controlled object of an air compressor was designed, and the research orientation was discussed deeply. Afterwards, the author details the designing technology of process control system of PCS 7 to improve the engineering in training, especially the problems we should pay attention to. Moreover, different industrial processes, such as temperature, level, pressure, were analyzed, and then the corresponding design methods and algorithms were put forward. according to what has been studied before, the author completely designed a stirred tank reactor control system based on PCS 7, and completed the system test, to enable it to put into use.Now, the engineering training system has been put into use, which enhances the study condition of undergraduate students, improves the automation teaching level of the colleges, and trains a large number of qualified persons for the society.