Design Procedure Of All Terrain Vehicle Based On Reverse Engineering Technology

For an in-depth research products and innovative design procedure, based on product design ATV example, this paper summed up a short product cycles Reverse Engineering Programming. It also did the system research on the reverse engineering technology of products, and how to rapidly reconstruct CAD model found on space 3D data points cloud.This paper focused on the three core areas of reverse engineering: making physical model,acquainting three-dimensional data from the model and reconstructing CAD model in computer. It also detailed introduction a new design procedure based on the application of reverse engineering. According to the demands from customers, the paper made position for the development of ATV market. It applied such as bionic design method for the prototype of a conceptual design of ATV, and then made a full-scale physical model. Vivid 910 3D scanner was used to collect spatial data from physical model, Software imageware was used to sample STL file to data points of cloud,. eliminate noise data and so on, It also applied software Pro/Engineer to complete a CAD model reconstruction work. The CAD model dealt with after smoothing techniques can be applied to the mold design,ergonomics research and analysis of the design procedure.Product modeling concepts design, physical modeling, CAD .model reconstruction process, innovative product design procedure will be applied in, especially for complex product modeling, the use of reverse engineering is more conducive to its innovative design.