The Design And Implementation Of The Metro Depot Integrated Management And Control Information Platform

As continuous expansion of domestic urban track traffic construction,a lot of subways will or have been operated after been built.Importance of maintenance for vehicles,which guarantees the operation safety,will be more and more prominent.Nowadays,the mode of maintenance and repair of track traffic vehicles in domestic cities is planned in settled cycle.There are little considerations of reality.Over repairmen and lack of repair of vehicles is widespread.It causes waste of labor and money,and left potential safety hazard.This essay will focus on the computerized management and control of subway vehicle section..It emphasizes on core work of subway vehicle section: management of vehicle inspection and maintenance,formulization of work plan,management of equipment life cycle,failure management,etc.We expounded the process of design and realization of an information platform system of comprehensive management and control of subway vehicle section based on B/S mode.The system was based on the requirement of No.2 line of XX subway.The fundamental developing platforms are Microsoft Visual Studio 2008 and Sqlserver2008.First,through research on this section and analysis of the core process,we have collected the requirement of the platform system.The system can be divided into four types according to different users: inspection director of vehicle section,dispatcher of inspection and repair,engineer of quality,shift and team user.The essay described the samples of each user,system inner and outer connector,requirement of quality property,and the interface prototype.Then we finished the overall design,quality property design,module design,particular module design,connector design and integrated design.Then we divided the system into 6 modules: system management module,vehicle management module,inspection and repair plan module,failure raise and report module,dispatch management module,shift and team module.To aim at the core task of the system,including inspection and repair plan,failure raise and report,dispatch management and,shift and team work,we utilized UML tool to draw an inner logic order diagram of these modules.In the process of achieving the system code,based on planned leading end and server code,finalized the testing report.The system has been used for 2 years.Through continuous perfection and optimization,daily working process of vehicle section has been welding into the system.The vehicle section has reinforced inner management and control,realized a managing and IT governing scheme,which satisfied subway vehicle section's needs.It accelerated resources integration,raised the operation efficiency effectively and lowered the operation cost..