The Design Of 10 Gigabit Ethernet Communication Protocol Converter Based On FPGA

With the rapid development of computer technology, communication technology and micro electronic technology,people put forward higher request to the transmission speed of data. Data exchange, data transmission is more and more large,data processing is becoming more and more complex,and the data must be real-time transmission,so the high speed data transmission system is an indispensable key component in the modern measurement and control communication system. The development trend of cloud computing services is based on the large-scale FPGA collaborative acceleration. The superiority of Gigabit Ethernet is more in line with the requirements of the present people.This design according to the mission requirements to TLK2711 device Ser Des as the research object,Design full duplex communication integrated method,Communication protocol based on Gigabit Ethernet, Providing 10Gbit/s transmission speed through different encoding ways or wavelength division multiplexing, Provide more bandwidth and processing power, Can effectively save the user's investment in the link.Standard is the core content is through using Xilinx Virtex?-7 Series FPGA chip design protocol converter will gigabit network out of the mouth of Ethernet format of data through the FPGA into a custom protocol format of data. The design of this design is based on FPGA to achieve a custom protocol and the conversion of Gigabit Ethernet protocol.