The Research Of 3D Display Measurement Based On Binocular Stereoscopic Vision

The new products of Magic Leap make the 3D display technology become a research focus once again. With the development of 3D display technology, the technology of 3D display measurement becomes more important. According to the research and the development of 3D display, the issue gives "The Research of 3D Display Measurement Based on Binocular Stereoscopic Vision".The issue focuses on the research of 3D display measurement based on binocular stereoscopic vision. Firstly, according to the principle of binocular parallax of 3D display technology, the issue analyzes the advantages and disadvantages of the different type of 3D display technology. Secondly, in order to further research the difference between binocular stereoscopic vision and monocular vision, the issue combines with the existing 3D display measurement standard of the international and the domestic, builds the 3D display measurement system, and uses binocular stereoscopic vision measurement system and monocular vision measurement system to measure the current popular 3D displays respectively, then analyzes the parameters and compares the result. Finally, making a comparison that binocular stereoscopic vision measurement system better than monocular vision measurement system obviously, for that not only the operation of the binocular stereoscopic vision measurement system is convenient, and the result is more accurate, but also gives quantitative evaluation of 3D depth caused by binocular parallax, "Depth of Field Testing", the parameter is the key parameter of the 3D display measurement, is also the most important advantage of 3D display measurement system. At present, the 3D display measurement standard of the international and the domestic have never given any unified measurement standard, so the method of measurement in this issue is the key innovations.This paper includes six chapters. The first chapter is an introduction, which describes the current 3D display measurement of the international and the domestic. The second chapter describes the imaging principle of 3D display technology, and the current problem of the classification of 3D display technology. There are four parts, glasses stereoscopic display technology, naked-eye stereoscopic display technology, holographic stereoscopic display technology and 4D light field display technology. Besides, their advantages and disadvantages are introduced. The third chapter summarizes the existing 3D display measurement standard of the international and the domestic, the best international standards are IDMS version 1.03 and VESA version 2.0, and there are some standard in China, and the issue puts forward some suggestion. The fourth chapter in order to further research the difference between binocular stereoscopic vision measurement system and monocular vision measurement system, the issue combines with the existing 3D display measurement standard of the international and the domestic, builds the 3D display measurement system, and uses binocular stereoscopic vision measurement system and monocular vision measurement system to measure the current popular 3D displays respectively. The firth chapter analyzes the parameters and compares the result, making a comparison between binocular stereoscopic vision measurement system and monocular vision measurement system, then draws a conclusion. In the sixth chapter, this paper has been summarized and the deficiencies has been point out, what's more, the next step is prospected.