| BIM has been widely used in the practice of architectural design, BIM can help architects to optimize the design of the project, to promote the coordination of different disciplines, to manage the design results by information, can improve project production efficiency, improve construction quality, shorten the construction period, reduce construction cost, etc.. However, the application method of the construction drawing design and construction guidance is relatively short, which affect the further promotion and use of BIM on the construction drawing design stage and the construction stage. As the quality of the construction drawing design is very important to the project construction quality. So this paper research a typical BIM application case by multi-angle, multi-aspect comparison and analysis. The research object is based on the application of BIM in the design stage and construction stage, mainly study the following contents: application strategy of BIM in the stage of construction drawing design and application strategy of BIM in construction stage.the study of the first phase of the case, combined with the feedback from the participating units, the author puts forward to improve the technical method and management process during the construction drawing design stage and construction instruction, which can help to adjust the original design ideas and cooperation mode.In the case of the second phase of the project construction process, by the consent of the participating units, Applicated the improved technical method, management process to construction, which improved the working efficiency of the design unit, reduced the construction process of the component, reduced the contradiction of equipment, reduced the design change, saved the resources and building materials consumption, shorted the construction period. All of this had getted the aadmiration of the participating units.Practice has proved that with the continuous development of information technology, BIM technology and application mode is also in constant maturity. In the future, the application of BIM technology will break through the category of technology and become a powerful driving force for change in the construction industry. Based on BIM technology to improve the level of project management, labor productivity, cost savings will be the key technology and research content to the construction industry which needs to solve and improve.The paper contains five chapters:Chapter I. Introduction. Mainly to the research background, research significance, domestic and foreign research present situation. The important concepts and the framework and innovation which relevant to this paper are introduced and discussed.Chapter II.Development and practice of domestic of BIM in foreign. Mainly analyzed and sorted the development and application of BIM in China and abroad. At the same time, the paper introduced the problems of the construction drawing design and construction guidance for the domestic application of BIM. Detailed analysis of the advantages of BIM in practical application and the content which need to improve.Chapter III. The advantages of using BIM in the construction drawing design and the construction guidance. This paper summarized and analyzed the shortcomings of the 2D design model and the advantages of BIM.Chapter IV.Through the analysis of the BIM application strategy in the construction drawing design and construction guidance stage, research the suitable application method for the construction drawing design and construction guidance stage. Put forward a targeted application strategy.Chapter V.The application of BIM technology. This paper mainly verified the application of the proposed method through the typical BIM application case. The two stages were analyzed respectively which to verify the value of the application strategy.Conclusion. This chapter summarized the conclusions of this paper. And prospected the future research and application of this field. |
PDF Full Text Request