The Design Of Intelligent Lighting Control System Based On Wireless Network

With the development of social economy, city street lighting system has becomea display of the charm of the city street lamp lighting system in the window,Convenient and beautiful at the same time, also met with many problems, the citystreet lights utilization rate is not high, a serious waste of energy. The traditional streetlamp system for waste of manpower and material resources burden for the society, itneeds a set of intelligent energy saving lighting control system to reduce the waste ofenergy.Firstly, this paper in-depth investigation and analysis of the research background,the development of technology and the present situation of wireless intelligentlighting control system, analyzes the shortcomings of the current intelligent lightingfield, clear the purpose and significance of this research, the main work of the paperto make a unified overview.Secondly, put forward the overall design scheme of the design, the entire systemis divided into four units, by analyzing the characteristics of the introduction ofZigBee technology and GPRS communication technology, has made the detailedexplanation of the main related technology.Then, the total control scheme of the system are given, and further introduces theZigBee network, and Mesh network for ZigBee is analyzed in detail, and throughcomparison of AODV and AODVjr two routing protocols, routing strategy to get thefinal, finally using OPNET software. The simulation result using AODVjr routingstrategy.The fourth, the five chapter respectively from the two aspects of hardware andsoftware is introduced in detail the four elements of the whole system. Including the chip and sensor selection, circuit design, program flow chart.Finally, based on the design and implementation, were tested for environmentalmonitoring module, ZigBee and GPRS communication module, the analysis ofexperimental results, the effective correction instrument. Wireless intelligent lightingand draw conclusions of this paper is designed to meet the requirements of the actualstreet lighting.