Design Of Experiment In The Application Of Electronic Industrial Production And Research

In the electronics industry production is obviously becoming more and more, and the human salary is higher and higher, the production profits instead more and more lower, challenging for plant production is higher and higher. The optimization of engineering and technical personnel and production line production process, improve the production efficiency, reduce production cost, achieve the goal of benefit maximization, put forward the serious challenge, in front of the engineering personnel production optimization model is put forward. With the popularization and improvement of optimization theory, optimization theory has gradually become the analysis methods of the engineering technology, one of the basic knowledge of essential management personnel. DOE (Design of Experiments) test Design is optimization method is often used in the production process to a set of classic methods. By arranging for the smaller scale test (or number), with shorter test period and low test cost, from a host of interference factors, find out the main influence factors, according to the influence of the interaction of various factors, so as to obtain a relatively ideal results and scientific conclusion, optimal solution, to promote the efficiency of production and reduce production costThis article is mainly aimed at the test fixture production factory production use reliability problem of the fixture are prepared and used by a detailed analysis of material parameters, to improve the production yield drop, low production abnormal working hours for the target. By using the method of experimental design, from the test fixture design, verification and practical use in testing perspective, fixture design reliability of the test are discussed in this paper. Combined with the actual practice, the feasibility of this research and excellent...