High-rise Residential Shear Wall Structure Design And Problem

Shear wall structure is a reinforced concrete walls under vertical load andvertical and horizontal resist lateral force structure of the system. Compared with theframe structure, Shear wall structural integrity is good, Structural lateral stiffness; Thereasonable design of ductile shear wall seismic performance is good, the earthquakedamage generally lighter; And can avoid the beam is shown in the interior, Make thebuilding beautiful and easy to use; This structure is suitable for multi-layer and30~40layer architecture, These conditions for the shear wall structure in the high-riseresidential all play a decisive role.This article first from the type of shear wall structure, combined with theresearch status of domestic and foreign scholars on residential structure, Analysis ofshear wall structure on the advantages and development trend of housing design;Secondly combining with the characteristics of the stress of the structure, constructionmeasures, specification requirements, calculation method, environmental indicatorsand construction requirements, This year are summarized to shear wall structuredesign often encounter problems and general solution; Compared the PKPM softwareand MIDAS/Gen advantages and disadvantages in the design of building structures inour country, Summarized in using PKPM software used in shear wall structure designparameters, the significance and its value; Courtyard13#residential building design,this paper introduces the general situation of the engineering structure, illustratesconstruction section size selection, component, material grade, appropriate calculationparameters; In the final analysis results, adjust the structure layout and the dimensionsof the indicators meet the design requirements, compare the two different types ofstair’s influence on structure seismic; Summarized in this paper, a bit of shear walldesign and insufficiency, proposed the expectations of the shear wall structure designin the future.Through the analysis and design method of this article apply to the same form ofshear wall structure analysis; Compared the AT and FT type stair can be seen that theFT type materials, two types of stair similar effects on the structure of the reverse.