Application Of Automatic Control In The Thermal Power Station Power Generation Technology

The main content of this paper is according to the analysis of reasons of Luoyangpetrochemical110kV line is larger in normal operation condition on the net charge, to controlthe generator automatic generation. Under normal operating modes, thermal power stationgenerator load basically meet the demand for electricity generating capacity, when the powergrid to the power station power input, and when the user of electricity generating capacity isgreater than the power station power output power. Thermal power stations on the110kV lineunder the net electricity from manual control, real-time difference, when the generator loadfluctuation is difficult to quickly and accurately adjust. This paper adopts the technology of anew automatic generation control, automatic generation of the new design control technologycan be on the net charge control in a smaller range, simple and convenient operation, therebyreducing the labor intensity of operators and increase economic benefit. This paper introducesin detail the petrochemical production for power supply and distribution system requirementsand the main problems, the principle of automatic control of power generation technology、themain components of the selection、 implementation scheme is discussed in this paper, on theexisting process adjustment after the transformation of. Through the above research, thesystem solves the manual adjustment of generator is difficult, the bottleneck problem under thenet power fluctuation range on the110kV line.