Research On The Decision Stage Cost Control Of Heating Pipe Construction

The management of traditional heating pipe construction focus on the costcontrol of the phase of construction. Though some cost might be saved during thisphase. The overall saving purpose can’t be significantly achieved. The application ofLife Cycle Cost control during the decision phase is more important than otherphases.with the construction going on, the construction purpose is getting more andmore clear, this leaves us less room for making changes to the cost control plan. Andit is getting more and more complicated to get over the limitation that is rising withthe construction. The cost control during the decision phase is probably the bestchance to make overall savings.Among all those cost obvious ones are cost designation, designing andconstruction cost. The hidden ones are running, maintenance and wreckage cost. Soit is not scientific to control only the obvious ones. Life Cycle Cost control is thecost control over a life cycle. Based on the overall and long term economical profits,take all the decision, designing, construction, running, maintenance and wreckagecost into consideration. The management of Life Cycle Cost was not only confinedto the construction period, but also gives us an overall cost control from designing towreckage.As for the heating pipe project，this article uses the Life Cycle Cost to analyzethe cost controls system. Establishes the platform and model of heating pipe projectcost control system. Levels up the control efficiency.