Radio technology is given from the modulated electromagnetic waves emitted by the detection target, which receives echo signals reflected by the antenna, after a series of signal processing and speed information obtained from the target. This paper describes a pseudo-random code keying fixed pitch signal processing technology, the transmit signal frequency hopping according to the law of the pseudo-random code, and thus has a wide signal bandwidth and greater signal processing gain, in terms of anti-jamming performance there are a lot of advantages, is a relatively broad prospects for fixed pitch system.Paper introduces the theory of pseudo-random code, and then set the principle that the IF signal processing technology and low-frequency signal processing techniques in two different ways from the beginning of the analysis process technology, verify its correctness by mathematical derivation from the pseudo-random code keying and in the MATLAB Simulink simulation platform environments to build the module, and the theoretical results are compared to a conclusion.On this basis, the paper select the low-frequency signal processing technology, distance and speed for a given signal processing algorithms in depth, according to the system requirements, software design using Altium signal processing circuit, and complete drawing PCB circuit board.Finally, based on the low-frequency signal processing techniques to write Verilog procedures, hardware emulation, and FPGA implementations, the basic completion of the speed function, to get a more satisfactory result. |