The Key Technology Of Infrared Terminal Controller Research And Implement In Smart Home

As the network technology, the rapid development of computer technology andcontrol technology, intelligent people to be resided to the home life put forward higherrequest. Smart home system with integrated wiring technology, networkcommunication technology, security technology, automatic control technology, audioand video technology as the main form, the daily household life related equipmentconsists of an organic whole, constitute the schedule efficient residential facilities andfamily affairs management model, and household appliances remote control is thebasic performance, intelligent family and intelligent household as a precondition fordevelopment, and so on home appliances remote control system research and designis particularly important.Because home appliances remote control system is too big,but solves the key technical problems, other problems can be solved, so this paperinvestigated the development situation at home and abroad and aiming at thecharacteristics of infrared home appliance control, with new design concept, gives thefollowing generation Internet protocol based solution for the intelligent householdsystem, the system puts forward two technical problems needs to solve, one will learnto ir code stored in the PC; Second based on IPv6wireless transmission mode for theintroduction of the system.Based on the above two problems, this paper put forward infrared controltechnology combined with Wi-Fi wireless communication technologies of homeappliances remote control system, designed the embedded technology based on thehousehold appliances remote control system general scheme, and describes thespecific hardware and software structure of the system. This paper explains thesystem hardware and software design methods, from a hardware perspectiveexpounds the function and design of the required modules, from the point of view ofan software embedded Linux operating system and application design process. At thesame time put forward the proposals in virtual learning infrared remote control signal,success will be infrared control signal is stored in the PC, the realization of the smarthome remote control laid a good foundation; ARM9as the hardware platform, basedon the Linux operating system is software, loaded the IPv6protocol and is configured with Wi-Fi drivers, and lay a good foundation for subsequent function.Paper mainly studies the infrared control signal and storage, reflected infraredappliance can be modified without the characteristics of the remote control. At thesame time, involved the ARM-Linux application development methods, according tothe need to write the wi-fi drivers. Based on the plan implementation of householdappliances remote control system, this paper not only low cost, wide coverage, butalso convenient for modification and simple to use, suitable for ordinary family lifethat occupy the home, also to the development of smart home system has certainguiding significance and reference value.