The Design And Implementation Of Service Provisioning Module Which Is A Subsystem Of Jiangsu Mobile Communication CRM System

With the continuous development of the modern communication technology,mobile phones are no longer limited to simple functions such as phone calls, shortmessages and so on, as the carried necessities, China Mobile is to give mobilephones more features, a lot of the daily life things which is needed to deal with anytime related services to provide users with advanced features in the form ofvalue-added services.The advanced value-added services are much more trouble than ordinaryservices in the opening process. After analysing the old service provisioningsubsystem, we found that there are many deficiencies in it and it can not support theneed for value-added services' opening well. Therefore, we need to re-design a newservice provisioning subsystem to meet the needs of the development of value-addedservices, innovative work orders and Xml data packet system applied to the newservice provisioning subsystem, and developed a new service provisioningsubsystem based on the single-line way of message packets and work orders.Packets and work orders single-line mode of service provisioning module iscollected by receiving the CRM front Xml packet data transmitted to generate part ofthe work orders, work then produced a single function through the HLR onlineinstruction is sent to the business platform, activated under the work order datainformation to configure business services; which work orders generated by thebusiness platform is the most important thing in the entire service provisioningmodule is an integral part of business processing, order processing, work orders todeal with three steps to create work orders, and send to the address where theplatform to activate the business, provide services for users.Finally, open mobile surfing business for the user to test the performance of theservice provisioning module, opened the business of mobile surfing smoothly inaccordance with the data collection, manufacturing work orders, and activate theservice a series of processes for the user did not encounter the problems affectingservice opened, and achieved good results.Proven based on the packet work order line service opened with good usability,and effectively support the development of value-added services, suitable for theapplication of Jiangsu Mobile CRM system. However, some individual places in the entire module we need to further adjust and optimize, which is also a later time thewhole module better in the general direction.