This article is stretching cold rolling equipment in the motion control system and the drive system of Siemens Software Exploration and thinking,in the introduction on the subject in the main source of tension cold rolling equipment principle,the form of equipment and processing technology on control system The requirements for further cold rolling stretch the required control equipment,control systems, transmission,speed form,the electrical type made a choice:Siemens Motion Control System(SIMOTION D425) and the drive system(SINAMICS S120) According load of equipment,electrical capacity,Fieldbus asked to select the appropriate parameters of the electrical components drive configuration;mechanical equipment under the structure of the shaft configuration;equipment in accordance with the requirements of a systematic process of implementation of the system configuration, background Procedures for the preparation and movement control procedures in the preparation;then elaborated in part debugger the problems encountered and the methods used;concluded control system in equipment used in the successful application. |