Uhmw-pe Pipe Production Line Intelligent Monitoring System

We can assemble equipment with some accessory which already existed according to some kind of goal and the request, Completing the work which cannot reliably, high speed, the low loss and the low cost be fullfiled; Then carries on the software configuration and the programming to this kind of equipment,we can also make these equipment turn to the manipulator, the robot, or the entire automatic production line and so on.Intelligent supervisory system suitably extends the tubing production line, its goal is monitoring and controlling all important parameters, enhancing the equipment to move the time stability and reliability.This topic mainly embarks from the practical application angle, resolve actual existing question. Analyzed the tube extruding craft and principle, in this foundation, proposed the control thought and control plan of the tube extruding equipment.This system is using the programmable controller as the master control unit, the sensor for examining part, VB6.0 programming the monitoring contact surface, Frequency governor as the execution component composite interdependence observation and control systems. We explain some key of the control system, with the programmable controller to control the frequency governor, thus realizes synchronization of the transmission system multi-electrical machinery speed control; Up machine and the programmable controller composes the multi-spots to heat up the control system the structure,the principle and the control thought, we demonstrate thes observation and control system on tube automatic production line application superiority through software and the hardware design analysis.