Intelligent Cabinets Monitoring System

In recent years, with modern rapid development of communication network, the scale of network enlarged continually, and the number of communication equipment increase continually. The rapid expansion of the communication equipment's scale requires the support of large number of modernization laboratory. Higher requirement are proposed for the maintenance, operation and management of the communication equipment. Due to the large number of equipment and lack of the maintenance, it is hard to make rapid response to the system fault. Therefore, advanced communications network must be adapted with a modern low, and the management of unmanned engine room, the operation can be good.Monitoring system on the engine room, the domestic and foreign products in this area, but all of the engine room of the various environmental parameters, such as access control, Smoke, temperature, humidity and so on, to carry out monitoring. And for the most important room in the cabinet to monitor the internal driving force for environmental products, and there is no related products available in the market. And existing products, which is very expensive, fixed-function, it is almost impossible to achieve through the expansion of the internal dynamics of the cabinet to monitor the environment. To develop a lower cost, therefore, specifically for rack power systems that monitor the environment of great significance. In this paper, the problem, design a set of intelligent monitoring system cabinets.In view of the cabinet room, design a set of intelligent monitoring system of the cabinet. Monitor the entire system including the rack, and transmission network, monitor the server is in three parts. The core of the whole system is mounted on a rack inside the monitor cabinet. Cabinets fitted with various sensors monitor, is mainly responsible for a variety of load on the internal cabinet, such as servers, network equipment, such as, for voltage, current, power, switch the state of the real-time data collection, through the transmission network, sent to monitor the server, for equipment failure alarm, fault analysis, load distribution to provide timely, necessary information. Server can also receive control commands through the monitor cabinet controlled internal wiring board, the load on the failure to make timely processing power. When, after troubleshooting, but also the implementation of closed-power operation, so that timely and operational equipment, reducing downtime losses, but also simplifies the steps in the work of maintenance personnel.The maintenance staff for the work of the engine room of the urgent need to design a set of intelligent monitoring software. It can be installed from the rack cabinet monitor real-time data collection. Data filtering, processing, reflected in the operation interface to monitor the staff can clearly understand that all of the cabinet room of the working conditions within the equipment. When any equipment shutdown, overload, voltage instability, such as temperature anomalies, the user interface to pop-up window warning to remind the attention of monitoring staff. When the short circuit, overload serious, critical situation, such as voltage is too high, it can automatically abnormal circuit operation of the equipment to prevent the occurrence of the accident. At the same time be able to start within the cabinet monitor loudspeakers warning, and guide the maintenance staff from the first time a large number of devices found to carry out emergency repairs of faulty equipment, which greatly improves the work efficiency.