With the development of the computer technology, the embedded systems have been widely used. ARM which is high-performance and low-power has gradually become mainstream choice for 16/32 bit embedded microprocessors. Nowadays many universities have the embedded system course, for which lots of practice is needed. It is necessary to develop a platform for research and education.A core board based on S3C2410X is designed and implemented in this thesis, which consists of S3C2410X microprocessor, memory, flash, crystal circuit and expansion interfaces. This thesis highlights the hardware design process, including the design of each module circuit schematic, the implementation and debug of the core board. In addition, this thesis also describes the composition of the embedded system, and explores the transplant process of the U-boot and the Linux operating system kernel. |