Relay protection testing instruments, the important equipment for the safety and the stabilization of the electrical power system, can test the capability and the working status of Relay protection instruments.So far, Relay protection testing software products are familiar, most of them are divided into tens current test part according to the protection style. They are applied, but there are some problems such as the difficult instruction and the low code efficiency. These years, a new method based on component technology for the Relay protection testing software is put forward, which suggest to pack the functional modules, especially the two basal testing processes.In this paper, we import the component technology and the Software Platform design mode into the coding of the Relay protection testing software products. Firstly, the current components were upgraded for the request of the software platform. Then some new components were designed. At last, Relay protection testing software was designed in software-platform method, so the components can work together. By using this Relay protection testing software platform, the customer can construct the interface and the test process freely, without too much code alteration. |