Clutch General Test Units Based On The Serial Communication

The wide range of online detection system,which involves the measuring range more and more , Surveyors are increasingly high requirements of the domestic now have a lot online detection system, But there are many single function systems,collecting less access,low collection rate, Operation of complex and demanding on the test environment and so on. it requires a broad scope of application ,high reliability and low-cost online detection system.This article describes a clutch-line detection system, Based on the analysis of the principle of the clutch system, The design of the detect life expectancy system.Through the angle sensors are used to measure the brake discrotation after the weight point of view,If it is found that more than book value perspective, Clutch has been damaged. Data acquisition system use A/D to convert analog signal into digital signal, communicate MCU with PC though serial communication and transmit data.PC display and store data,complete data collection, transmission, reception, storage and then encrypt data.The comprehensive clutch test based on Serial communication convert the signal from angle sensor, collected by the single-chip, and then use communication between MCU and PC to be sent to PC, PC store data, post-process data ,display data, then encrypt data for data.this acquisition system has powerful data-processing, intuitive,user-friendly, cost-effective features, which has a wide range of application.