Research And Application Of Graphics Module Technology Based On Tabular Layouts Of Article Characteristics

Based on analyzing the product development process of CAD, using the Graphics Module technology , this paper will help improve the CAD technology in product design automation and intelligent. This paper not only completes all kinds of drawing of Graphics Module but also completes dynamic editing of Graphics Module, and on the basis of Tabular Layouts of Article Characteristics completes varying design, eventually converts to the model of engineering drawings. The full text reads as follows:First of all, this paper introduces a Graphics Module and the concept of nature from the two sides of the structure and function of the Graphics Module classification, using SolidWorks in the secondary development of technology for the graphic elements of the modeling process parameters.Then, in accordance with the requirements, Graphics Module can be assembled products automatically, and completes the preliminary design model of the initial parts of the products and does the necessary editing for the formed modules to change parts of the product structure and on the basis of things characteristic form. to do variant design. They make product design parts more reasonable and satisfy the requirements of the designer or customer. Finally it realizes components automatically generate based on the three-dimensional model and can operate some property of parts.Finally, this paper gives the examples to introduce the function of developed system on the basis of Tabular Layouts of Article Characteristics.