The Research Of Embedded Network System Based On ARM

With Internet technical maturation, the exaltation of the bandwidth, and the function of the embedded product is also no longer single, traditional 8-bit micro-chip controller hasn't already satisfied a gradually complicated applied need more and more because it's speed, ability of looking for instruction, cost and so on。With a series of advantages for example small size, low cost and high performance the processor based on ARM kernel is the ideal choice that embedded product upgrades from 8-bit processor to 32-bit processor。At the same time we should choose suitable embedded operating system based on hardware platform for the sake of distributing and managing resources system, achieving more complicated task。So the thesis combines microprocessor S3C4510B based on 32-bit ARM kernel and uClinux together to design an embedded using system。Firstly the thesis; carries on detailed analysis to the structure, principle and function of the microprocessor S3C4510B, at the same time it makes little introduction of other hardware units.Then it's software platform on system structure, principle,editing, transplanting and appending using programming are descibed。Finally it emphasizes on the concrete application design process of the embedded network system of S3C4510B。The thesis put forward the improvement project in the system function stability,the funtion diversification,this also is creative point of the text。The experiment proves that the system is stable, the usage is convenient,and it's the function is diverse,so the system come to an expected result.