The Design And Study Of Embedded Controller Based On QTE

A kind of embedded industry network controller based on QTE designed in the thesis according to the demand for industry environment. Common control system consists of PLC, DCS and so on, and the controller given in the thesis can make the constructure of control system be simple, maintain easily, use conveniencely.The control system consists of hardware and soft system, and writer mainly was responsible for soft part. The control system realize good control effect through debug.The thesis lines the system design flow, tells the technology of the hardware structure and the soft development,For the convenience of transplanting it to many kinds of operating systems, the whole soft system developed by Qt/Embedded.In chapter 1, Introduction of Embedded system and the feasibility of point and some other related techniques are discussed.In chapter 2, the principle of system is introduced, including thecharacteristic of electromagnetic wave, the principle of distance measuring and the principle of orientation measuring.In chapter 3, Embedded GUI are discussed. Qt/Embedded are selected as the Embedded GUI and is introduced simplly. then developing and running environment of embeded system is bulit.In chapter 4, the realization inroduction of system.In chapter 5, I have concluded the main work which has been done in the article, pointed out the realised effect and the researching work needs to done later.