Monitoring And Management System For Operation Status Of Electric Power Equipment

The power supply system has a wide area,a variety of transformer system links,and a complex power network pipeline.Power equipment and compute nodes must be monitored in real time,from factories to transmission lines to customer networks,which is essential to ensure the economic interests of the power sector and customers.Therefore,it is necessary to detect and control these power equipment and nodes effectively,instantaneously and with high precision.The purpose of this study is to design a real-time monitoring power equipment system.First of all,the design requirements of the system are deeply analyzed,and combined with the actual situation,comprehensive consideration of the important parameters and environmental parameters of the collection,and finally choose the remote data transmission mode based on GPRS technology,put forward a complete system design scheme.On this basis,the hardware circuit is designed,mainly communication system and monitoring site hardware design,monitoring site mainly includes microcontroller,power supply and sensor hardware design,sensor includes electrical signal and nonelectrical signal acquisition module.Communication system is mainly the hardware design of remote communication.Using GPRS and short message combined data transmission mode.After the design of the hardware circuit,the communication module and sensor software design,and the client and server side of the technical analysis,the client wheel speed and display part of the functional interface.And the system is tested to verify the effect of the system,and it is applied to the actual project,in order to obtain better results.Research and develop the system optimization software to realize the optimization combination of the operation parameters of related power equipment.