| Nowadays,with the improvement of living quality,smart home has become one of the hot issues in contemporary research.Aiming at the intelligent home control system,this paper studies and analyzes the latest research progress and achievements of the Internet of things technology at home and abroad,and aims at the shortcomings of the existing intelligent home control system in control precision and real-time,and puts forward a design scheme of the intelligent home control system with low cost,high precision and real-time.The system has good application and reference value.Firstly,this paper selects the ZigBee technology in the Internet of things technology as the basic communication architecture,takes the CC2530 chip as the processing core,combines the wireless communication networking technology with the sensor application technology,and realizes the intelligent networking of the home environment.Secondly,according to the diversity of the home environment,the multi-sensor data fusion algorithm is selected,and the sensor information is fused with the home environment through the fuzzy neural network algorithm.The feasibility and accuracy of the algorithm are verified by data analysis and simulation.Thirdly,according to the needs of the home environment,the hardware is equipped with a series of temperature and humidity,light,gas,infrared anti-theft and relay for transmission Sense and control of terminal equipment.Then,the software uses the Zig Bee wireless network to connect each terminal device successfully,realizes the real-time detection and upload of the home environment data,and realizes the intelligent control of the system through the gateway module.By Labview the upper computer management platform,the login,management,control and alarm interface is designed to process the collected environmental data and display the data in the form of charts on the corresponding interface.On the basis of multi-parameter sensing,real-time data analysis and man-machine networking,the system fully considers economic benefits and achieves the purpose of low power consumption,low cost,stability and reliability.The test results show that the system can ensure the safety of the user’s house,optimize the scheme of the home security system,and meet the requirements of reliability,real-time and security of the system. |