| The development of CAD and CAM technology has significantly increased efficiency in each individual area. The independent development, however, greatly restrained the improvement of overall efficiency from design to manufacturing. The simple integration between CAD and CAM systems has been achieved. Current integrated CAD/CAM systems can share the same geometry model of a product in a neutral or proprietary format. However, the process plan information of the product from CAPP systems cannot serve as a starting point for CAM systems to generate tool paths and NC programs. The user still needs to manually create the machining operations and define geometry, cutting tool, and various parameters for each operation.;Features play an important role in the recent research on CAD/CAM integration. This thesis investigated the integration of CAD/CAM systems based on machining features. The focus of the research is to connect CAPP systems and CAM systems by machining features, to reduce the unnecessary user interface and to automate the process of tool path preparation. Machining features are utilized to define machining geometries and eliminate the necessity of user interventions in UG. A prototype is developed to demonstrate the CAD/CAM integration based on machining features for prismatic parts. The prototype integration layer is implemented in conjunction with an existing CAPP system, FBMach, and a commercial CAD/CAM system, Unigraphics. Not only geometry information of the product but also the process plan information and machining feature information are directly available to the CAM system and tool paths can be automatically generated from solid models and process plans. |
