Design And Implementation Of Engineering Mode Mobile Phone APP Based On ZTE Mobile Phone Platform

Since the 21 st century,mobile Internet technology has been continuously updated with the development of modern science and technology,and people’s demand for mobile network quality is also increasing.The popularization of mobile networks in the modern society has brought great profits to major operators,but also brought tremendous pressure on them.Because operators need to monitor and troubleshoot radio frequency optimization of the voice and data service quality of their operating networks,with the rapid growth of mobile communication users,the traditional method of manual data acquisition using dedicated instruments for network data acquisition can not meet the needs,which bring great challenges to major operators.With the development and popularization of Android mobile terminals in recent years,using the Android engineering mode mobile phone can obtain the network mode under the different network conditions near the terminal and the surrounding unlimited WIFI addresses,and can also obtain the information of the primary cell and the neighboring cell.Moreover,under the condition that there is no card or card,the engineering mode mobile phone can achieve the function of obtaining network information and analyzing network data.Therefore,research on mobile data acquisition APP has important engineering application value and attractive market prospects in modern society.This thesis is based on the engineering mode of the Android mobile phone platform and designs a mobile phone application(APP)that can obtain various network parameters in both carded and cardless modes.Specifically speaking,the research work of this topic mainly includes the following aspects:1.On the basis of fully researching and analyzing the research of the subject at home and abroad,the overall architecture of the mobile network data acquisition system based on the Android engineering mode mobile phone is designed,including system-related functions and structures,data collection and display methods.2.After careful analysis of the requirements of the application program,the development of the mobile network acquisition system based on the Android engineering mode mobile phone was completed using Android application development technology.3.Install the APP developed in this project on the mobile phone terminal,and make dedication and experiment in the practical application environment,and give the system analysis report.Experiments show that the APP developed in this thesis can achieve accurate acquisition and display of signal strength,geographic location,etc.of the Android terminal.Compared with other similar products,the product can automatically obtain various network signal parameters such as 2G,3G,or 4G at the current location of the terminal without a card or a card.However,in other products,the cardless mode cannot be achieved.The function of the network information data,or the lack of a function of parsing a specific network mode,therefore this product has strong competitiveness in similar products.In addition,an engineering parameter-based network parameter acquisition APP can switch different network environments(such as TD-LTE and FDD-LTE switching)at the application layer in real time.Other similar APPs require at least one minute.Switch from the upper level.In the areas of network optimization parameters collection,mobile rescue,base station troubleshooting,radio frequency optimization,and public security investigation,the product will enjoy more applications due to its advantages of portability,rich functions,and comprehensive acquisition parameters.