Research On The Planning Of Power Distribution Automation Optical Fiber Full Coverage Network

With the rapid development of power distribution network automation technology,it puts forward higher and higher requirements for communication.The large and complex power distribution network must have a perfect and reliable communication network system.So it's important to plan a perfect basic communication network.At present,the program of the distribution network automation to the network usually stays in the aspect of network architecture.When it needs to be implemented,because there are many nodes in the area of distribution automation,it takes a long time to complete the program with traditional methods,and the advantages and disadvantages of the related program are not easy to verify.The content of this paper uses a variety of planning algorithms,according to certain planning needs,to plan the project alternatives,improve the planning method and efficiency.The main contents of this paper include:1.Research the existing communication network architecture,long-term planning and network construction requirements.2.According to the existing network architecture and planning requirements,select the relevant design schemes.3.Use the traditional aggregation algorithm and the modified aggregation algorithm to plan and design the distribution network communication network,and compare and analyze their advantages and disadvantages.4.Use the modified planning algorithm to plan and design the distribution network communication network,and analyze its advantages and disadvantages.This paper focuses on the communication network planning of distribution network automation.By consulting relevant information and studying relevant planning methods at home and abroad,and combining with the relevant situation of distribution network in Shenzhen,to find and improve the problems faced by traditional algorithms in the field of distribution network communication planning.Through the improvement of the original design planning algorithm,verification and analysis,the goal of the planning and design is achieved.At the same time,it also provides certain practical and theoretical guidance for the construction and planning of the distribution automation communication network in other areas.