Design And Implementation Of Security Atutomation System For Community

The typical requirement system of building automation security system has become a research hotspot in the field of building intellectualization.Buildings are closely related to people's lives and the improvement of automation and intellectualization of buildings will greatly improve people's quality of life.The research of building automation security system involves not only mechanical electronics,sensor information fusion,intelligent control technology,but also communication,computer,network and other fields.It continuously absorbs new technologies,improves the stability of building security system,reduces energy consumption and improves efficiency,and promotes the research and development of architecture,monitoring and sensors.Therefore,the research of building automation security system is difficult,and has the theoretical research value and practical application value of demand.Building automation security system construction serves people's living buildings,which needs an automation system with high reliability and good performance.In this paper,the building automation security system is studied in depth,and a building automation security system based on the building experimental equipment of secondary vocational school is designed.The main contents are as follows:First,introduced the significance of building automation research and research status at home and abroad,introduced the research status and development trend of building automation security system at home and abroad.The composition and working principle of building security system are introduced,and the subsystems of building security system are introduced in detail.Second,the design requirements of Building Automation Security System in residential area are analyzed,the overall design scheme of security system is formulated,the design of hardware part of security system is elaborated in detail,and the design process and working principle of each functional module of the hardware part of security system are introduced separately.The hardware includes four subsystems: intercom access control and indoor security,anti-theft alarm and peripheral prevention,closed-circuit television monitoring,patrol and power module.The problems needing attention in hardware design are also introduced.Third,introduced the software setting core of Building Automation Security System in residential area,analyzed the key of software design and setting of each subsystem,and elaborated the operation procedure flow of each subsystem.According to the functional requirements of each system,software settings and debugging are carried out.The process of settings and debugging involved in building security system software in residential area is described in detail,including "Visual Interview Application System" application software,CMS7000 software,WEB settings and "Patrol Management System A1.0" software,etc.The process combines some data and results running on the management center computer of the security system.Fourth,an example of building automation security system design in a district is introduced.The requirement analysis,design basis and design description of the project construction are introduced.This paper expounds the construction wiring,equipment selection and drawing construction of each subsystem.At the end of this dissertation,it summarizes the results of the work,and puts forward the prospects for improvement in the subject.