Development Of Test Program Design Software For Joint Test Platform

At present,Harbin Institute of Technology has designed and developed a joint test platform to achieve a high efficiency and low cost construction of a joint test environment.In order to carry out a test task,first,the evaluators of weapons and equipment develop test strategies,determine the test items and test procedures,specify the test data to be acquired and its evaluation algorithms,and perform test tasks based on the joint test platform.However,due to the lack of research on the ability test method,the joint testing and evaluation of weapons and equipment lacks standardized guidance;since there is no test plan design software,the test planning work is disconnected from H-JTP,and a large amount of work requires manual configuration,resulting in the test and evaluation workload.The correctness of the large,experimental system cannot be automatically verified,and the test resources are difficult to match.Therefore,this subject develops a joint test method suitable for China's weapon equipment testing and evaluation needs,and develops test plan design software to realize the logical integration of test plan design software and joint test platform,and improve China's weaponry joint test and evaluation system..In this paper,by analyzing the joint test evaluation strategy and the output files of the combat background construction software and the input files needed for the operation platform,this paper proposes a test design method that can support the operation of the H-JTP platform and conform to China's national conditions.The test design method is joint operation.The background and evaluation strategy are input.After the development of the test policy,the refinement of the input content and the design of the test plan,the logical range and test plan set that can be operated in the H-JTP environment are finally output,and then the test design is designed.Each step of the method was analyzed in detail.Based on the above research methods,according to the requirements of software engineering,based on the object-oriented thinking,the joint test platform test program design software was developed.Starting from the software requirements,the function analysis of the software is carried out first,then the software use case analysis is carried out,then the software is static model,dynamic model,and software interface design.Finally,the software code is written,and the developed software is carried out.Unit testing to verify that the software features meet the requirements.Finally,an application system verification was built,a verification scheme was proposed,the verification process was described in detail,and the verification results were analyzed.The verification results show that the proposed test design method is reasonable and feasible.The joint test platform test plan design software can meet the requirements of the joint test evaluation strategy and operational background construction,realize the scenario formulation and evaluation strategy refinement,and generate the requirements to meet the operational requirements.The logical range and test plan documentation set to meet application needs.