The Design And Implement Of Simulation Training System For River Engineering Reconnaissance Vehicle Based On Virtual Reality Technology

In recent years,with the development of computer technology,it is common that using computer technology to simulate the actual environment in scientific training.Due to the advantage of cost-effective,reliable,efficient,safety and flexible,it is widely used in a varity of simulation training platforms.In the process of training,the change of virtual view and motion simulation are implemented by virtual reality technology and it will make drivers immersed in drivering.In this article,we introduced all the design and test of the simulation training software system.Varity of main techniques are cured in the system.1.The active demand of river engineering reconnaissance vehicle training system had been analyzed.The design requirement and development technology solution are also introduced.The virtual environment and facilities are constructed by virtual reality technology.The motion of simulation facilities are controled by simulation input equipment and computer input equipment.2.The flame structure was constructed and every function module was designed in this article.The main function parts of this system are system administration module,virtual reality view administration module,investigation data controling and processing center,prompt module,testing module,imput signal processing module,output signal processing module,module database and investigation database.3.The exploit environment and solutions are introduced,especially the real simulation facility,connector,set up of computer and software development environment.The administration system was consisted by design of windors and system controlling module.The virtual reality view administration module,investigation data controling and processing center,imput signal processing module,output signal processing module,module database and investigation database are implemented too.4.The integration of entire system was researched.The classify model of input and output was established.Then,we made the test plan with the combined system.The validity and stability of this system was described by the results.