Research Of Safety Production Standardization For Guodian Karemay Power Generation Company

The power production work is extremely dangerous,accidents happen from time to time,Once problems arise,they can cause irreparable damage to employees' lives and property.The particularity of electric power industry makes the power generation enterprise pay more and more attention to the safety production.The standardization of electric power production can reduce the risk of production accidents in the power industry as much as possible,and minimize the harm and loss of electric power.It is a long-term healthy development stage for power enterprises.In order to guide and standardize the standardization work of standardization of power safety production,the State Electricity Regulatory Commission in accordance with the actual situation of the power industry,decided to carry out the standardization work of production safety standardization of power generation enterprises in advance.At the first meeting of production safety management committee Chinese Guodian group company in 2014,the leadership of the Corporation,Chinese Guodian thermal power enterprises before the end of 2017 all through the standardization of production safety inspection,and continuous improvement,the initial formation of long-term management mechanism of safety production.Therefore,according to the requirements of Guodian Karemay power generation company safety production standardization work,and achieve the "standard" rating is a rigid requirement of the group company.The purpose of this study is to analyze the status quo,problems and influencing factors of safety production standardization in Guodian Karamay power generation company,and put forward some measures to improve the standardization of safety production.This study can provide direct theoretical guidance for the Guodian Karamay power generation company safety production standardization,but also provide a reference for the construction of similar enterprises safety production standardization,so that to get attention and strengthen production safety standards for electric power enterprises through high safety production standardization review to provide protection.In order to achieve the purpose of the study,reviewed the relevant theory and literature based on the standard of safe production of power generation enterprises,and then combined with the author's own experience,based on the collation and analysis of large amounts of data,through case comparison method,literature analysis method,with the use of quantitative and qualitative methods,the actual production safety the standardized construction process of Guodian Karamay power generation company and the evaluation results were analyzed,and pointed out that there are still problems.Then,from the aspects of personnel psychology and behavior,equipment quality and account book,indoor and outdoor environment,management system,assessment mechanism and executive ability,the main factors affecting the safety standardization construction of the company are analyzed.The study found that,by carrying out safety production standardization,Guodian Karamay power generation company operation to improve the environment and safety production facilities more perfect and standardized,standardization of safety production management system more perfect,more clear management responsibilities,and ultimately form a good situation of maintenance standardization,standard operation management,safety production standardization,and the safety production standardization group assessment standards.But there are still some problems,such as superficial system,standardization of process,poor control of equipment and sub health of equipment.Influence of Guodian Karamay power generation company safety production standardization construction of the main factors including human factors,material factors,environmental factors "," management factors "in four aspects.Therefore,in order to promote the standardization of safety production,the countermeasures are put forward for these four aspects.At the same time,some suggestions are put forward to improve the evaluation system by using the method of 5M1 E.