Design And Implementation Of Monitoring System For Mobile Intelligent Device

Building automation system is also called Automation System Building?BAS?,which is an indispensable part of intelligent building,and its mission is to monitor and control the energy use,environment,traffic and safety facilities.But in the current situation,this is based on the console display,the background server,the model of the front-end,to the function of the BAS system has caused some inconvenience.For example,some equipment monitoring room is not a person on duty for 24 hours,every day on duty is only the morning before going to the monitor room to view the situation.Also,the general equipment monitoring room,and out of more stringent requirements.Each time out of the procedures are more complex,if the delay time is relatively long,may cause unpredictable consequences.This system application software project development management method,using c⁺⁺ and java development language,respectively carries on to the backstage server,the forwarding server and the mobile terminal development.Borrow ACE and wxWidgets open source framework to achieve the background server,which is used to communicate with the "being monitoring equipment",using spring framework to achieve real-time data forwarding server,which is used to communicate with the mobile terminal;SDK app to develop a mobile terminal Android,allowing users to view and manipulate data at any time.That is,on the basis of the existing industrial control system architecture,adding a mobile terminal,so that some need to view the device status information at any time,displayed on the phone.Mobile phone can not only view the real-time status of the concerned equipment,but also can control the remote control of the device.By integrating the above modules,the monitoring system of mobile intelligent equipment is realized.Based on the principle of SCADA system,this system extends the function of mobile device monitoring.Fully reflect the flexibility of mobile terminals,real-time,simple,security.Completely make up for the operator can not be long in the monitoring room of this embarrassing defect.To make the inspectors or other relevant staff,leaders at any time and place can master the operation parameters and operation status of the field equipment in real time,and the status of the field environment.Effectively reduce the harm caused by equipment damage.To improve the management level,reduce the workload of maintenance and management personnel,reduce the equipment failure is of great benefit.