Application Obstacles And Case Analysis Of BIM Technology In Building Decoration Industry

With the transformation of China's construction industry to industrialization and information transformation,nearly two or three years BIM technology applications into the rapid promotion stage.At present,many of our construction enterprises in China are studying BIM technology,BIM technology has a certain understanding,and are actively in the research results into practice.China's BIM technology at this stage is mainly used in some large and complex projects,and achieved very good results,in the building decoration project there have been many applications BIM technology benchmarking project.Such as the three buildings in the construction of the East in August 2015 completed the Shanghai CNOOC Building 1-9 layer built;Suzhou gold mantis decoration in March 2016 completed in Shanghai Center three tenders built and Nanjing Green Olympic Center;2016 May,Zhejiang Asia-Xiamen decoration completed the Shanghai Disneyland part of the built-in.In the building decoration project,not only more types of work,construction process,complex process,but also in the construction process and other professional have a lot of cross,it is to increase the difficulty of construction.In addition,a variety of reasons leading to rush workers will also reduce the quality of construction,resulting in waste of resources and so on.BIM technology application and development,can make the whole life cycle of the indicators are fully controlled,so BIM technology in the field of architectural decoration research and application of far-reaching significance.This paper has three main objectives:(1)to understand the BIM technology in the construction industry in the application of the status;(2)summarize the BIM technology in the construction industry in the application of the general obstacles;(3)identification BIM technology in the building decoration industry The key obstacle.The main purpose of this paper is to study the application of BIM technology in the architectural decoration industry.There are five chapters in this paper.The main contents of each chapter are as follows:Chapter 2: The background of BIM and architectural decoration industry: the theory of BIM,construction industry,building decoration industry,the construction industry,the construction industry,the construction industry,the construction industry,the construction industry,the construction industry,The concept of building decoration market and the application of BIM technology in the architectural decoration industry.Chapter 3: Questionnairesurvey and analysis: The key factors of BIM technology application in building decoration industry are obtained through comprehensive evaluation method.This chapter mainly includes the design questionnaire,The analysis of the validity of the questionnaire analysis,the analysis of the results of the three parts;Chapter IV,case analysis: analysis of the case of BIM application of the main obstacles,and one by one analysis,and the questionnaire to compare the conclusions of the final Reasonable suggestions to promote the development of BIM technology in the architectural decoration industry.Chapter 5: Conclusion and Prospect: Summarize and summarize the main conclusions of this paper,and finally discuss the limitations of this paper and the problems that can be discussed in depth.The author summarizes the application of BIM technology in the architectural decoration industry and analyzes the effective questionnaire survey data,and draws the following conclusions:(1)Through the literature review,20 BIM technology in the architectural decoration industry in the application of obstacles,Including the high cost of investment,the slow learning of BIM-related technologies,the lack of support from senior managers,the ambiguity of the design and the ambiguity of the data owners,and so on;(2)through the data analysis BIM in the building decoration(47.32%),lack of industry standard(47.40%),and lack of relevant training(47.72%),lack of industry standard(47.40%),lack of industry(47.70%),lack of industry standard(47.40%),(41.83%),low level of cooperation between project participants(40.53%),lack of actual benefits(34.64%)from BIM,lack of demand for BIM(39.87%),design the responsibility is not clear(36.60%),lack of relevant skills and knowledge(40.53%),common use of the difference between different BIM software(37.25%),data owners Ambiguity(26.80%),that the existing technology is enough(38.56%),use of existing BIM applications more limited(35.95%),lack of support from senior managers(34.64%).Through the factor analysis,BIM technology in the building decoration industry in the application of key obstacles are the staff barriers,technical barriers,organizational barriers,regulatory barriers and economic barriers.