The Design And Implementation Of Center Software Of Intelligent Monitoring System In The Big Scenes On The Basis Of The Internet Of Things

The tall_pole lamp has a large illumination zone and can remarkablly improve the brightness of the lighting area, which is widely used in the big scene lighting, such as highways, airports, squares, docks. While the traditional way of illumination in big scenes has the following disadvantages:poor reliability, easily influenced by the working condition, bad maintainability, high energy consumption. In order to improve the service life of lamps, reduce the energy consumption, on the basis of computer technology, network communication technique and the technology of the Internert of Things, this thesis designs and implements the center saftware for intelligent montoring system for big scenes lighting, which includes basic controls, control task customization and implementation, real-time monitoring, automatic alarm, system management and data query.According to the functional requirements, the monitoring system is devided into two parts: the intelligent terminal controllers and the center software. The intelligent terminal controllers is mainly responsible for the real-time detection and devices control, which send the real-time data to the center software throught the communicatuin module. The center software analyzes the data according to the established protocol on receiving the data, and stores the valid data in the database, then update the content of the user interface.At the same time, the operator can control the remote device by operating on user interface of the center software.The overall structure of the center software is planned,and the center software is divided into two parts:backgroud processes and the user interface.The backgroud processes includes the commmunication module,data stores,the data storage module,task scheduling module, device management and so on. The design and development of the communication format is made, the procedure of data packing, data analysizing, the Power Line Communication and GPRS Communication are implemented in the thesis.According to the data content of the center software, the matching data table is designed.The data management in center software is realized.The process of the control task is designed and implemented; The management of device status is implemented in the center software.The designing of user interface contains the Main interface, Control Task set interface,Real-time information monitoring interface,Fault alarm information interface,Query statistics interface, System Management Interface.Conbined the intelligent terminal controllers with the center software, the system is test as a whole, It is proved that the center software has reached the designed requirements, which has good maintainability, operability, intelligency and high practicability.