Research And Design Of Large Inventory System Based On RFID

With the increase of large domestic storage rooms,the efficiency of the traditional storageroom management software has been seriously lagging behind. There is a desperate need fornew storage room solutions. As an emerging automatic identification technology, RFID hasbeen widely used in many areas, such as manufacturing and assembly, library management,identification mark, sports timing, intelligent transportation, access control systems, airlinebaggage handling, document tracking, logistics and supply chain management. Due to theadvantages of RFID, this paper will be RFID focused to design storage room managementsystem, take full advantages of the characteristics of RFID, achieve precise management andcontrol of the aircraft materials and meet the rapid demand out of storage.This thesis will research full of RFID technology,including the principle of RFID andRFID development and so on,Because of the aviation equipment is varied, if only using onetype of label,that will case a side effect on recognition to RFID,so we need to use the RFIDtag technology selection, so that the whole project is better using RFID technology. In thedesign of new stock system, we use RFID technology as the center, to improve efficiency toreduce the error rate for the purpose of design, to make sure that the entire stock system isadvanced.Taken into account of scalability and maintainability of the system at the beginning ofdesign, this system draws the design ideas of SpringMVC in the framework and takehierarchical development of thinking to greatly reduce the coupling coefficients betweenlayers. Meanwhile, this system has integrated and expanded the lastest popular framework in the frame design to accelerate the speed of development and enhance the stability of thesystem. Due to the problems of the management systems need to spend a lot of time for thetreatment of the interface, this paper has taken use of Google's latest Smart GWT frameworkand write Java code to complete the drawing of some complex interface to greatly reduce thedevelopment strength and effectively short the development period. This paper also shows theimplementation process of some storage rooms, including the RFID print module, certificatefile module, inventory report, and the external communication module, these modules aretraditional inventory system there is no or incomplete functions, to make full use of the latesttechnology and characteristics of RFID, when we design these modules,we take fullyconsider the convenience of system transplantation, and accompanied by a detaileddescription of the code, all of these modules can be used for the enterprises and institutions tocarry out expansion reference, at the same time this paper is focused on software test, thegood software testing can effectively reduce the system error and reduce repeated tests aftermodify codes, considering the complexity of the online environment, this paper also makes adetailed performance test, ensure security deposit system under high load of normal running.